 |
ES110
Mortice Strike
The ES100 product range of patented Burglar Resistant Strikes
is used with all access control installations where flexibility,
security and lower cost is required. Having a deeper than
normal throat, this electric strike will operate with a greater
range of locks and offers the same level of security usually
provided by more expensive electric locking systems. |
 |
ES150
Rim Mount Strike
The ES150 group of patented Burglary Resistant Strikes are
surface mounted electric strikes designed to convert rim or
surface type door locks into a simple low cost access control
system. Being surface mounted, the ES150 is easily installed
and can be controlled by a simple keypad or keyswitch, or
integrated into a full building management system for access
control. |
|
ES200/ES2000
Mortice Strike
The ES200 (non-monitored) and ES2000 (monitored) group of
patented Burglar Resistant Strikes are designed for high security
applications and manufactured from solid stainless steel.
These strikes have a built in face plate further strengthening
the strike to withstand the harshest treatment. They offer
a strong dependable and long-lasting electric strike solution
and are suitable for use with any access control system using
90 degree swing doors. These strikes are extremely flexible
and can be changed from power-to-lock or power-to-open, mounted
on the left or right hand side of the door and come as standard
with a continuously rated coil, thus reducing the amount of
stock needed to cover each application. |
|
ES600
Hook Lock
The ES600 patented Surface Lock offers easy to install high
security with Power to Lock and Power to Open mode change
in one integrated package. The lock is suitable for both swing
and sliding doors or gates and is easily attached to wood
or steel door frames and structures. The mechanical properties
of the ES600 exceeds the holding properties of all electromagnetic
locks and extends lock and door monitoring into the high security
range. The lock is compatible with building access and supervisory
systems both with respect to security and fire. |
 |
ES700/7000
Hook Lock
The ES 700/7000 surface lock has been designed with the architect
in mind. Fundamentally similar in design to the ES600, the
ES700/7000 has a cast aluminium cover that can be supplied
in a wide variety of colours to match existing door frames.
The lock is suitable for swinging doors and is easily attached
to wood or steel door frames. On a standard 2040mm door frame
this low profile lock complies with the minimum headroom requirement
as stipulated in the Building Code of Australia. With its
high preload (side load) capability (up to 500kg), high holding
force (1362kg), and 4 hour fire rating, the ES700/7000 is
ideal for fire door applications and anywhere a high security
surface mount solution is required. |
|
DROPBOLTS
Padde's range of drop bolts represent true engineering innovation,
design excellence and superior quality customers have come
to expect and demand from Padde. Designed for use on swing-through,
double action doors these drop bolts are ideal for applications
where an electric strike is impractical. A stylish range of
stainless steel surface mount housings and accessories are
available making these drop bolts an attractive, unobtrusive
solution for glass door applications.
• TB25
This is the most popular model in the range. Having a very
slim faceplate this drop bolt is designed to be installed
in any type of door frame and can be converted from Power
to Lock (PTL) to Power to Open (PTO). Smart electronic functions
inside this drop bolt include: 8 x lock and unlock attempts,
8 second unlock delay, automatic relock after 8 seconds, power
reduction circuitry to limit the holding current, and a one
time thermal fuse cut-out in case of solenoid overheating.
The faceplate and strike plate have been finished in stainless
steel.
• TB25KO
Functionally the same as the TB25 in every respect, the TB25KO
differs in that it has a provision for a Euro profile key
cylinder as a means of mechanical override in the event of
power failure. The faceplate and strike plate are finished
in stainless steel. (refer to photo on front page)
• TB32-38 (TB32)
Having less features than the TB25 this drop bolt was designed
for the cost conscious and is available in the Power to Lock
configuration only. There are no onboard electronics and unlock
and relock times must be controlled by the access control
system. The standard bolt (TB32-38) is supplied with a 38mm
wide faceplate however a 32mm faceplate is available as an
option (TB32). Please specify the faceplate size when ordering.
• TB38
Functionally this drop bolt is the same as the TB25 in every
respect apart from the faceplate, body and bolt pin dimensions
which are given in the technical pdf that is downloadable
on this page. The faceplate and strike plate are finished
in stainless steel. |
|
Electric
Cabinet Locks
The EL110 Cabinet lock is a small cast aluminium lock designed
for cabinets having either swing or sliding doors where access
control is a requirement and keys are not the total answer.
The Cabinet Lock designed to hold 150kgs ( 330 lbs) can be mounted
both vertically and horizontally. The EL110 can be controlled
by any existing access control system or simply controlled through
a remote key pad or key switch and suitable for installations
that have only one or multiple cabinet applications |
|
Electromagnetic
Locks
The EML series of electromagnetic locks are characterised
by their high quality and proven reliability in both fire
and security applications. Different models are available
to suit a variety of requirements including single, sliding
or double doors, with or without monitoring. They are particularly
suited to very high traffic applications, as they employ no
moving parts. EML's can be operated by stand-alone devices
such as keypads or integrated into full Building Management
Systems for total access control.
Water Resistant Electromagnetic
Lock
The weather resistant EML is designed for external installations,
including gates and other exposed locations. Like all Trimec
EML's the weather resistant version is characterised by its
high quality and innovative design. Unlike other external
EML's the EM5000G has been produced specifically for the Australian
market and includes an Australian Standard conduit fitting.
Additionally, the lock incorporates several unique features
including both face and side fixing in one unit. The body
is 316 grade stainless steel and the unit features dual-voltage
and hall-effect monitoring as standard. Like all EML's the
EM5000G is particularly suited to high traffic applications,
employing no moving parts. EML's can be operated by stand-alone
access control systems such as keypads, or integrated into
complete access control networks. |
